Dharanyadevi blogspot subsume with E-books, Notes, Lab Manual, Question Banks, Interview Tips, Viva Questions, Basics and Interview Questions for engineering students. For Any Help Contact dharanyadevi@gmail.com

SEARCH

Image
Showing posts with label Viva and Basic Questions Part 3. Show all posts
Showing posts with label Viva and Basic Questions Part 3. Show all posts

Wednesday, May 30, 2012

Operating System: Interview, Viva and Basic Questions Part 3

Interview, Viva and Basic Questions of Operating System Part 3

1. What is thrashing?

It is a phenomenon in virtual memory schemes when the processor spends most of its time swapping pages, rather than executing instructions. This is due to an inordinate number of page faults.

2. Explain Belady's Anomaly?

Also called FIFO anomaly. Usually, on increasing the number of frames allocated to a process virtual memory, the process execution is faster, because fewer page faults occur. Sometimes, the reverse happens, i.e., the execution time increases even when more frames are allocated to the process. This is Belady's Anomaly. This is true for certain page reference patterns.

3. What is a binary semaphore? What is its use?

A binary semaphore is one, which takes only 0 and 1 as values. They are used to implement mutual exclusion and synchronize concurrent processes.

4. Explain the concept of Reentrancy?

It is a useful, memory-saving technique for multiprogrammed timesharing systems. A Reentrant Procedure is one in which multiple users can share a single copy of a program during the same period. Reentrancy has 2 key aspects: The program code cannot modify itself, and the local data for each user process must be stored separately. Thus, the permanent part is the code, and the temporary part is the pointer back to the calling program and local variables used by that program. Each execution instance is called activation. It executes the code in the permanent part, but has its own copy of local variables/parameters. The temporary part associated with each activation is the activation record. Generally, the activation record is kept on the stack.
Note: A reentrant procedure can be interrupted and called by an interrupting program, and still execute correctly on returning to the procedure.

5. List the Coffman's conditions that lead to a deadlock.

  1. Mutual Exclusion: Only one process may use a critical resource at a time.
  2. Hold & Wait: A process may be allocated some resources while waiting for others.
  3. No Pre-emption: No resource can be forcible removed from a process holding it.
  4. Circular Wait: A closed chain of processes exist such that each process holds at least one resource needed by another process in the chain.

6. What are short, long and medium-term scheduling?

Long term scheduler determines which programs are admitted to the system for processing. It controls the degree of multiprogramming. Once admitted, a job becomes a process.

Medium term scheduling is part of the swapping function. This relates to processes that are in a blocked or suspended state. They are swapped out of real-memory until they are ready to execute. The swapping-in decision is based on memory-management criteria.

Short term scheduler, also know as a dispatcher executes most frequently, and makes the finest-grained decision of which process should execute next. This scheduler is invoked whenever an event occurs. It may lead to interruption of one process by preemption.

7. What are turnaround time and response time?

Turnaround time is the interval between the submission of a job and its completion. Response time is the interval between submission of a request, and the first response to that request.

8. What are the typical elements of a process image?

User data: Modifiable part of user space. May include program data, user stack area, and programs that may be modified.

User program: The instructions to be executed.

System Stack: Each process has one or more LIFO stacks associated with it. Used to store parameters and calling addresses for procedure and system calls.

Process control Block (PCB): Info needed by the OS to control processes.

9. What is the Translation Lookaside Buffer (TLB)?

In a cached system, the base addresses of the last few referenced pages is maintained in registers called the TLB that aids in faster lookup. TLB contains those page-table entries that have been most recently used. Normally, each virtual memory reference causes 2 physical memory accesses- one to fetch appropriate page-table entry, and one to fetch the desired data. Using TLB in-between, this is reduced to just one physical memory access in cases of TLB-hit.

10. What is the resident set and working set of a process?

Resident set is that portion of the process image that is actually in real-memory at a particular instant. Working set is that subset of resident set that is actually needed for execution. (Relate this to the variable-window size method for swapping techniques.)

11. When is a system in safe state?

The set of dispatchable processes is in a safe state if there exists at least one temporal order in which all processes can be run to completion without resulting in a deadlock.

12. What is cycle stealing?

We encounter cycle stealing in the context of Direct Memory Access (DMA). Either the DMA controller can use the data bus when the CPU does not need it, or it may force the CPU to temporarily suspend operation. The latter technique is called cycle stealing. Note that cycle stealing can be done only at specific break points in an instruction cycle.

13.What are the basic functions of an operating system?

Operating system controls and coordinates the use of the hardware among the various applications programs for various uses. Operating system acts as resource allocator and manager. Since there are many possibly conflicting requests for resources the operating system must decide which requests are allocated resources to operating the computer system efficiently and fairly. Also operating system is control program which controls the user programs to prevent errors and improper use of the computer. It is especially concerned with the operation and control of I/O devices.

14.Why paging is used?

Paging is solution to external fragmentation problem which is to permit the logical address space of a process to be noncontiguous, thus allowing a process to be allocating physical memory wherever the latter is available.

15.While running DOS on a PC, which command would be used to duplicate the entire diskette?

diskcopy

16.What resources are used when a thread created? How do they differ from those when a process is created?

When a thread is created the threads does not require any new resources to execute the thread shares the resources like memory of the process to which they belong to. The benefit of code sharing is that it allows an application to have several different threads of activity all within the same address space. Whereas if a new process creation is very heavyweight because it always requires new address space to be created and even if they share the memory then the inter process communication is expensive when compared to the communication between the threads.

17.What is virtual memory?

Virtual memory is hardware technique where the system appears to have more memory that it actually does. This is done by time-sharing, the physical memory and storage parts of the memory one disk when they are not actively being used.

18.What is the state of the processor, when a process is waiting for some event to occur? –

Waiting state

19.What is the important aspect of a real-time system or Mission Critical Systems?

A real time operating system has well defined fixed time constraints. Process must be done within the defined constraints or the system will fail. An example is the operating system for a flight control computer or an advanced jet airplane. Often used as a control device in a dedicated application such as controlling scientific experiments, medical imaging systems, industrial control systems, and some display systems. Real-Time systems may be either hard or soft real-time. Hard real-time: Secondary storage limited or absent, data stored in short term memory, or read-only memory (ROM), Conflicts with time-sharing systems, not supported by general-purpose operating systems. Soft real-time: Limited utility in industrial control of robotics, Useful in applications (multimedia, virtual reality) requiring advanced operating-system features.

20.What is the difference between Hard and Soft real-time systems?

A hard real-time system guarantees that critical tasks complete on time. This goal requires that all delays in the system be bounded from the retrieval of the stored data to the time that it takes the operating system to finish any request made of it. A soft real time system where a critical real-time task gets priority over other tasks and retains that priority until it completes. As in hard real time systems kernel delays need to be bounded

21.What is the cause of thrashing? How does the system detect thrashing? Once it detects thrashing, what can the system do to eliminate this problem?

Thrashing is caused by under allocation of the minimum number of pages required by a process, forcing it to continuously page fault. The system can detect thrashing by evaluating the level of CPU utilization as compared to the level of multiprogramming. It can be eliminated by reducing the level of multiprogramming.

22.What is multi tasking, multi programming, multi threading?

Multi programming: Multiprogramming is the technique of running several programs at a time using timesharing. It allows a computer to do several things at the same time. Multiprogramming creates logical parallelism. The concept of multiprogramming is that the operating system keeps several jobs in memory simultaneously. The operating system selects a job from the job pool and starts executing a job, when that job needs to wait for any i/o operations the CPU is switched to another job. So the main idea here is that the CPU is never idle. Multi tasking: Multitasking is the logical extension of multiprogramming .The concept of multitasking is quite similar to multiprogramming but difference is that the switching between jobs occurs so frequently that the users can interact with each program while it is running. This concept is also known as time-sharing systems. A time-shared operating system uses CPU scheduling and multiprogramming to provide each user with a small portion of time-shared system. Multi threading: An application typically is implemented as a separate process with several threads of control. In some situations a single application may be required to perform several similar tasks for example a web server accepts client requests for web pages, images, sound, and so forth. A busy web server may have several of clients concurrently accessing it. If the web server ran as a traditional single-threaded process, it would be able to service only one client at a time. The amount of time that a client might have to wait for its request to be serviced could be enormous. So it is efficient to have one process that contains multiple threads to serve the same purpose. This approach would multithread the web-server process, the server would create a separate thread that would listen for client requests when a request was made rather than creating another process it would create another thread to service the request. To get the advantages like responsiveness, Resource sharing economy and utilization of multiprocessor architectures multithreading concept can be used.

23. What is hard disk and what is its purpose? –

Hard disk is the secondary storage device, which holds the data in bulk, and it holds the data on the magnetic medium of the disk.Hard disks have a hard platter that holds the magnetic medium, the magnetic medium can be easily erased and rewritten, and a typical desktop machine will have a hard disk with a capacity of between 10 and 40 gigabytes. Data is stored onto the disk in the form of files.

24.What is fragmentation? Different types of fragmentation?

Fragmentation occurs in a dynamic memory allocation system when many of the free blocks are too small to satisfy any request. External Fragmentation: External Fragmentation happens when a dynamic memory allocation algorithm allocates some memory and a small piece is left over that cannot be effectively used. If too much external fragmentation occurs, the amount of usable memory is drastically reduced. Total memory space exists to satisfy a request, but it is not contiguous. Internal Fragmentation: Internal fragmentation is the space wasted inside of allocated memory blocks because of restriction on the allowed sizes of allocated blocks. Allocated memory may be slightly larger than requested memory; this size difference is memory internal to a partition, but not being used

25.What is DRAM? In which form does it store data?

DRAM is not the best, but it’s cheap, does the job, and is available almost everywhere you look. DRAM data resides in a cell made of a capacitor and a transistor. The capacitor tends to lose data unless it’s recharged every couple of milliseconds, and this recharging tends to slow down the performance of DRAM compared to speedier RAM types.

26.What is Dispatcher?

Dispatcher module gives control of the CPU to the process selected by the short-term scheduler; this involves: Switching context, Switching to user mode, Jumping to the proper location in the user program to restart that program, dispatch latency âۉ€Å“ time it takes for the dispatcher to stop one process and start another running.

27.What is CPU Scheduler?

Selects from among the processes in memory that are ready to execute, and allocates the CPU to one of them. CPU scheduling decisions may take place when a process: 1.Switches from running to waiting state. 2.Switches from running to ready state. 3.Switches from waiting to ready. 4.Terminates. Scheduling under 1 and 4 is non-preemptive. All other scheduling is preemptive.

28.What is Context Switch?

Switching the CPU to another process requires saving the state of the old process and loading the saved state for the new process. This task is known as a context switch. Context-switch time is pure overhead, because the system does no useful work while switching. Its speed varies from machine to machine, depending on the memory speed, the number of registers which must be copied, the existed of special instructions(such as a single instruction to load or store all registers).

29.What is cache memory?

Cache memory is random access memory (RAM) that a computer microprocessor can access more quickly than it can access regular RAM. As the microprocessor processes data, it looks first in the cache memory and if it finds the data there (from a previous reading of data), it does not have to do the more time-consuming reading of data from larger memory.

30.What is a Safe State and what is its use in deadlock avoidance?

When a process requests an available resource, system must decide if immediate allocation leaves the system in a safe state. System is in safe state if there exists a safe sequence of all processes. Deadlock Avoidance: ensure that a system will never enter an unsafe state.

31.What is a Real-Time System?

A real time process is a process that must respond to the events within a certain time period. A real time operating system is an operating system that can run real time processes successfully.

32. What is meant by arm-stickiness?

If one or a few processes have a high access rate to data on one track of a storage disk, then they may monopolize the device by repeated requests to that track. This generally happens with most common device scheduling algorithms (LIFO, SSTF, C-SCAN, etc). High-density multisurface disks are more likely to be affected by this than low density ones.

33. What are the stipulations of C2 level security?

C2 level security provides for:

  1. Discretionary Access Control
  2. Identification and Authentication
  3. Auditing
  4. Resource reuse

34. What is busy waiting?

The repeated execution of a loop of code while waiting for an event to occur is called busy-waiting. The CPU is not engaged in any real productive activity during this period, and the process does not progress toward completion.

35. Explain the popular multiprocessor thread-scheduling strategies.

  1. Load Sharing: Processes are not assigned to a particular processor. A global queue of threads is maintained. Each processor, when idle, selects a thread from this queue. Note that load balancing refers to a scheme where work is allocated to processors on a more permanent basis.
  2. Gang Scheduling: A set of related threads is scheduled to run on a set of processors at the same time, on a 1-to-1 basis. Closely related threads / processes may be scheduled this way to reduce synchronization blocking, and minimize process switching. Group scheduling predated this strategy.
  3. Dedicated processor assignment: Provides implicit scheduling defined by assignment of threads to processors. For the duration of program execution, each program is allocated a set of processors equal in number to the number of threads in the program. Processors are chosen from the available pool.
  4. Dynamic scheduling: The number of thread in a program can be altered during the course of execution.

36. When does the condition 'rendezvous' arise?

In message passing, it is the condition in which, both, the sender and receiver are blocked until the message is delivered.

37. What is a trap and trapdoor?

Trapdoor is a secret undocumented entry point into a program used to grant access without normal methods of access authentication. A trap is a software interrupt, usually the result of an error condition.

38. What are local and global page replacements?

Local replacement means that an incoming page is brought in only to the relevant process address space. Global replacement policy allows any page frame from any process to be replaced. The latter is applicable to variable partitions model only.

39. Define latency, transfer and seek time with respect to disk I/O.

Seek time is the time required to move the disk arm to the required track. Rotational delay or latency is the time it takes for the beginning of the required sector to reach the head. Sum of seek time (if any) and latency is the access time. Time taken to actually transfer a span of data is transfer time.

40. Describe the Buddy system of memory allocation.

Free memory is maintained in linked lists, each of equal sized blocks. Any such block is of size 2^k. When some memory is required by a process, the block size of next higher order is chosen, and broken into two. Note that the two such pieces differ in address only in their kth bit. Such pieces are called buddies. When any used block is freed, the OS checks to see if its buddy is also free. If so, it is rejoined, and put into the original free-block linked-list.

41. What is time-stamping?

It is a technique proposed by Lamport, used to order events in a distributed system without the use of clocks. This scheme is intended to order events consisting of the transmission of messages. Each system 'i' in the network maintains a counter Ci. Every time a system transmits a message, it increments its counter by 1 and attaches the time-stamp Ti to the message. When a message is received, the receiving system 'j' sets its counter Cj to 1 more than the maximum of its current value and the incoming time-stamp Ti. At each site, the ordering of messages is determined by the following rules: For messages x from site i and y from site j, x precedes y if one of the following conditions holds....(a) if Ti

42. How are the wait/signal operations for monitor different from those for semaphores?

If a process in a monitor signal and no task is waiting on the condition variable, the signal is lost. So this allows easier program design. Whereas in semaphores, every operation affects the value of the semaphore, so the wait and signal operations should be perfectly balanced in the program.

43. In the context of memory management, what are placement and replacement algorithms?

Placement algorithms determine where in available real-memory to load a program. Common methods are first-fit, next-fit, best-fit. Replacement algorithms are used when memory is full, and one process (or part of a process) needs to be swapped out to accommodate a new program. The replacement algorithm determines which are the partitions to be swapped out.

44. In loading programs into memory, what is the difference between load-time dynamic linking and run-time dynamic linking?

For load-time dynamic linking: Load module to be loaded is read into memory. Any reference to a target external module causes that module to be loaded and the references are updated to a relative address from the start base address of the application module.

With run-time dynamic loading: Some of the linking is postponed until actual reference during execution. Then the correct module is loaded and linked.

45. What are demand-paging and pre-paging?

With demand paging, a page is brought into memory only when a location on that page is actually referenced during execution. With pre-paging, pages other than the one demanded by a page fault are brought in. The selection of such pages is done based on common access patterns, especially for secondary memory devices.

46. Paging a memory management function, while multiprogramming a processor management function, are the two interdependent?

Yes.

47. What is page cannibalizing?

Page swapping or page replacements are called page cannibalizing.

48. What has triggered the need for multitasking in PCs?

  1. Increased speed and memory capacity of microprocessors together with the support fir virtual memory and
  2. Growth of client server computing

49. What are the four layers that Windows NT have in order to achieve independence?

  1. Hardware abstraction layer
  2. Kernel
  3. Subsystems
  4. System Services.

50. What is SMP?

To achieve maximum efficiency and reliability a mode of operation known as symmetric multiprocessing is used. In essence, with SMP any process or threads can be assigned to any processor.

51. What are the key object oriented concepts used by Windows NT?

Encapsulation, Object class and instance.

52. Is Windows NT a full blown object oriented operating system? Give reasons.

No Windows NT is not so, because its not implemented in object oriented language and the data structures reside within one executive component and are not represented as objects and it does not support object oriented capabilities.

53. What is a drawback of MVT?

It does not have the features like

  1. ability to support multiple processors
  2. virtual storage
  3. source level debugging

54. What is process spawning?

When the OS at the explicit request of another process creates a process, this action is called process spawning.

55. How many jobs can be run concurrently on MVT?

15 jobs.

56. List out some reasons for process termination.

  1. Normal completion
  2. Time limit exceeded
  3. Memory unavailable
  4. Bounds violation
  5. Protection error
  6. Arithmetic error
  7. Time overrun
  8. I/O failure
  9. Invalid instruction
  10. Privileged instruction
  11. Data misuse
  12. Operator or OS intervention
  13. Parent termination.

57. What are the reasons for process suspension?

  1. swapping
  2. interactive user request
  3. timing
  4. parent process request

58. What is process migration?

It is the transfer of sufficient amount of the state of process from one machine to the target machine.

59. What is mutant?

In Windows NT a mutant provides kernel mode or user mode mutual exclusion with the notion of ownership.

60. What is an idle thread?

The special thread a dispatcher will execute when no ready thread is found.

61. What is FtDisk?

It is a fault tolerance disk driver for Windows NT.

62. What are the possible threads a thread can have?

  1. Ready
  2. Standby
  3. Running
  4. Waiting
  5. Transition
  6. Terminated

63. What are rings in Windows NT?

Windows NT uses protection mechanism called rings provides by the process to implement separation between the user mode and kernel mode.

64. What is Executive in Windows NT?

In Windows NT, executive refers to the operating system code that runs in kernel mode.

65. What are the sub-components of I/O manager in Windows NT?

  1. Network redirector/ Server
  2. Cache manager.
  3. File systems
  4. Network driver
  5. Device driver

66. What are DDks? Name an operating system that includes this feature.

DDks are device driver kits, which are equivalent to SDKs for writing device drivers. Windows NT includes DDks.

67. What level of security does Windows NT meets?

C2 level security.

68. What is a command interpreter?


The part of an Operating System that interprets commands and carries them out.

A command interpreter is the part of a computer operating system that understands and executes commands that are entered interactively by a human being or from a program. In some operating systems, the command interpreter is called the shell.

The BIOS is looking for the files needed to load in case of Windows are the Command.com. The required files are Command.com, IO.sys, and Msdos.sys to get Windows started. They reside in the Root of the C Drive.

69. What is a command interpreter?

A command interpreter is a program which reads the instructions given by the user. It then translates these instructions into the context of the operating system followed by the execution. Command interpreter is also known as ‘shell’.

70. Explain the basic functions of process management.

The basic functions of the process management are :

  • Allocating resources to processes,
  • enabling processes to share and exchange information,
  • protecting the resources of each process from other processes and
  • enabling synchronisation among processes.

Monday, May 28, 2012

Computer Networks: Interview, Viva and Basic Questions Part 3

Interview, Viva and Basics Question of Computer Networks Part 3

1. Define Network?

A network is a set of devices connected by physical media links. A network is recursively is a connection of two or more nodes by a physical link or two or more networks connected by one or more nodes.

2. What is a Link?

At the lowest level, a network can consist of two or more computers directly connected by some physical medium such as coaxial cable or optical fiber. Such a physical medium is called as Link.

3. What is a node?

A network can consist of two or more computers directly connected by some physical medium such as coaxial cable or optical fiber. Such a physical medium is called as Links and the computer it connects is called as Nodes.

4. What is a gateway or Router?

A node that is connected to two or more networks is commonly called as router or Gateway. It generally forwards message from one network to another.

5. What is point-point link?

If the physical links are limited to a pair of nodes it is said to be point-point link.

6. What is Multiple Access?

If the physical links are shared by more than two nodes, it is said to be Multiple Access.

7. What are the advantages of Distributed Processing?

a. Security/Encapsulation
b. Distributed database
c. Faster Problem solving
d. Security through redundancy
e. Collaborative Processing

8. What are the criteria necessary for an effective and efficient network?

a. Performance
It can be measured in many ways, including transmit time and response time. b. Reliability
It is measured by frequency of failure, the time it takes a link to recover from a failure, and the network's robustness.
c. Security
Security issues includes protecting data from unauthorized access and virues.

9. Name the factors that affect the performance of the network?

a. Number of Users
b. Type of transmission medium
c. Hardware
d. Software

10. Name the factors that affect the reliability of the network?

a. Frequency of failure
b. Recovery time of a network after a failure

11. Name the factors that affect the security of the network?

a. Unauthorized Access
b. Viruses

12. What is Protocol?

A protocol is a set of rules that govern all aspects of information communication.

13. What are the key elements of protocols?

The key elements of protocols are
a. Syntax
It refers to the structure or format of the data, that is the order in which they are presented.
b. Semantics
It refers to the meaning of each section of bits.
c. Timing
Timing refers to two characteristics: When data should be sent and how fast they can be sent.

14. What are the key design issues of a computer Network?

a. Connectivity
b. Cost-effective Resource Sharing
c. Support for common Services
d. Performance

15. Define Bandwidth and Latency?

Network performance is measured in Bandwidth (throughput) and Latency (Delay). Bandwidth of a network is given by the number of bits that can be transmitted over the network in a certain period of time. Latency corresponds to how long it t5akes a message to travel from one end off a network to the other. It is strictly measured in terms of time.

16. Define Routing?

The process of determining systematically hoe to forward messages toward the destination nodes based on its address is called routing.

17. What is a peer-peer process?

The processes on each machine that communicate at a given layer are called peer-peer process.

18. When a switch is said to be congested?

It is possible that a switch receives packets faster than the shared link can accommodate and stores in its memory, for an extended period of time, then the switch will eventually run out of buffer space, and some packets will have to be dropped and in this state is said to congested state.

19. What is semantic gap?

Defining a useful channel involves both understanding the applications requirements and recognizing the limitations of the underlying technology. The gap between what applications expects and what the underlying technology can provide is called semantic gap.

20. What is Round Trip Time?

The duration of time it takes to send a message from one end of a network to the other and back, is called RTT.

21. Define the terms Unicasting, Multiccasting and Broadcasting?

If the message is sent from a source to a single destination node, it is called Unicasting.
If the message is sent to some subset of other nodes, it is called Multicasting.
If the message is sent to all the m nodes in the network it is called Broadcasting.

22. What is Multiplexing?

Multiplexing is the set of techniques that allows the simultaneous transmission of multiple signals across a single data link.

23. Name the categories of Multiplexing?

a. Frequency Division Multiplexing (FDM)
b. Time Division Multiplexing (TDM)
i. Synchronous TDM
ii. ASynchronous TDM Or Statistical TDM.
c. Wave Division Multiplexing (WDM)

24. What is FDM?

FDM is an analog technique that can be applied when the bandwidth of a link is greater than the combined bandwidths of the signals to be transmitted.

25. What is WDM?

WDM is conceptually the same as FDM, except that the multiplexing and demultiplexing involve light signals transmitted through fiber optics channel.

26. What is TDM?

TDM is a digital process that can be applied when the data rate capacity of the transmission medium is greater than the data rate required by the sending and receiving devices.

27. What is Synchronous TDM?

In STDM, the multiplexer allocates exactly the same time slot to each device at all times, whether or not a device has anything to transmit.

28. List the layers of OSI

a. Physical Layer
b. Data Link Layer
c. Network Layer
d. Transport Layer
e. Session Layer
f. Presentation Layer
g. Application Layer

29. Which layers are network support layers?

a. Physical Layer
b. Data link Layer and
c. Network Layers

30. Which layers are user support layers?

a. Session Layer
b. Presentation Layer and
c. Application Layer

31. Which layer links the network support layers and user support layers?

The Transport layer links the network support layers and user support layers.

32. What are the concerns of the Physical Layer?

Physical layer coordinates the functions required to transmit a bit stream over a physical medium.
a. Physical characteristics of interfaces and media
b. Representation of bits
c. Data rate
d. Synchronization of bits
e. Line configuration
f. Physical topology
g. Transmission mode

33. What are the responsibilities of Data Link Layer?

The Data Link Layer transforms the physical layer, a raw transmission facility, to a reliable link and is responsible for node-node delivery.
a. Framing
b. Physical Addressing
c. Flow Control
d. Error Control
e. Access Control

34. What are the responsibilities of Network Layer?

The Network Layer is responsible for the source-to-destination delivery of packet possibly across multiple networks (links).
a. Logical Addressing
b. Routing

35. What are the responsibilities of Transport Layer?

The Transport Layer is responsible for source-to-destination delivery of the entire message.
a. Service-point Addressing
b. Segmentation and reassembly
c. Connection Control
d. Flow Control
e. Error Control

36. What are the responsibilities of Session Layer?

The Session layer is the network dialog Controller. It establishes, maintains and synchronizes the interaction between the communicating systems.
a. Dialog control
b. Synchronization

37. What are the responsibilities of Presentation Layer?

The Presentation layer is concerned with the syntax and semantics of the information exchanged between two systems.
a. Translation
b. Encryption
c. Compression

38. What are the responsibilities of Application Layer?

The Application Layer enables the user, whether human or software, to access the network. It provides user interfaces and support for services such as e-mail, shared database management and other types of distributed information services.
a. Network virtual Terminal
b. File transfer, access and Management (FTAM)
c. Mail services
d. Directory Services

39. What are the two classes of hardware building blocks?

Nodes and Links.

40. What are the different link types used to build a computer network?

a. Cables
b. Leased Lines
c. Last-Mile Links
d. Wireless Links

41. What are the categories of Transmission media?

a. Guided Media
i. Twisted - Pair cable
1. Shielded TP
2. Unshielded TP
ii. Coaxial Cable
iii. Fiber-optic cable
b. Unguided Media
i. Terrestrial microwave
ii. Satellite Communication

42. What are the types of errors?

a. Single-Bit error
In a single-bit error, only one bit in the data unit has changed
b. Burst Error
A Burst error means that two or more bits in the data have changed.

43. What is Error Detection? What are its methods?

Data can be corrupted during transmission. For reliable communication errors must be deducted and Corrected. Error Detection uses the concept of redundancy, which means adding extra bits for detecting errors at the destination. The common Error Detection methods are
a. Vertical Redundancy Check (VRC)
b. Longitudinal Redundancy Check (VRC)
c. Cyclic Redundancy Check (VRC)
d. Checksum

44. What is Redundancy?

The concept of including extra information in the transmission solely for the purpose of comparison. This technique is called redundancy.

45. What is VRC?

It is the most common and least expensive mechanism for Error Detection. In VRC, a parity bit is added to every data unit so that the total number of 1s becomes even for even parity. It can detect all single-bit errors. It can detect burst errors only if the total number of errors in each data unit is odd.

46. What is LRC?

In LRC, a block of bits is divided into rows and a redundant row of bits is added to the whole block. It can detect burst errors. If two bits in one data unit are damaged and bits in exactly the same positions in another data unit are also damaged, the LRC checker will not detect an error. In LRC a redundant data unit follows n data units.

47. What is CRC?

CRC, is the most powerful of the redundancy checking techniques, is based on binary division.

48. What is Checksum?

Checksum is used by the higher layer protocols (TCP/IP) for error detection

49. List the steps involved in creating the checksum.

a. Divide the data into sections
b. Add the sections together using 1's complement arithmetic
c. Take the complement of the final sum, this is the checksum.

50. What are the Data link protocols?

Data link protocols are sets of specifications used to implement the data link layer. The categories of Data Link protocols are 1. Asynchronous Protocols
2. Synchronous Protocols
a. Character Oriented Protocols
b. Bit Oriented protocols

51. Compare Error Detection and Error Correction:

The correction of errors is more difficult than the detection. In error detection, checks only any error has occurred. In error correction, the exact number of bits that are corrupted and location in the message are known. The number of the errors and the size of the message are important factors.

52. What is Forward Error Correction?

Forward error correction is the process in which the receiver tries to guess the message by using redundant bits.

53. Define Retransmission?

Retransmission is a technique in which the receiver detects the occurrence of an error and asks the sender to resend the message. Resending is repeated until a message arrives that the receiver believes is error-freed.

54. What are Data Words?

In block coding, we divide our message into blocks, each of k bits, called datawords. The block coding process is one-to-one. The same dataword is always encoded as the same codeword.

55. What are Code Words?

"r" redundant bits are added to each block to make the length n = k + r. The resulting n-bit blocks are called codewords. 2n - 2k codewords that are not used. These codewords are invalid or illegal.

56. What is a Linear Block Code?

A linear block code is a code in which the exclusive OR (addition modulo-2) of two valid codewords creates another valid codeword.

57. What are Cyclic Codes?

Cyclic codes are special linear block codes with one extra property. In a cyclic code, if a codeword is cyclically shifted (rotated), the result is another codeword.

58. Define Encoder?

A device or program that uses predefined algorithms to encode, or compress audio or video data for storage or transmission use. A circuit that is used to convert between digital video and analog video.

59. Define Decoder?

A device or program that translates encoded data into its original format (e.g. it decodes the data). The term is often used in reference to MPEG-2 video and sound data, which must be decoded before it is output.

60. What is Framing?

Framing in the data link layer separates a message from one source to a destination, or from other messages to other destinations, by adding a sender address and a destination address. The destination address defines where the packet has to go and the sender address helps the recipient acknowledge the receipt.

61. What is Fixed Size Framing?

In fixed-size framing, there is no need for defining the boundaries of the frames. The size itself can be used as a delimiter.

62. Define Character Stuffing?

In byte stuffing (or character stuffing), a special byte is added to the data section of the frame when there is a character with the same pattern as the flag. The data section is stuffed with an extra byte. This byte is usually called the escape character (ESC), which has a predefined bit pattern. Whenever the receiver encounters the ESC character, it removes it from the data section and treats the next character as data, not a delimiting flag.

63. What is Bit Stuffing?

Bit stuffing is the process of adding one extra 0 whenever five consecutive Is follow a 0 in the data, so that the receiver does not mistake the pattern 0111110 for a flag.

64. What is Flow Control?

Flow control refers to a set of procedures used to restrict the amount of data that the sender can send before waiting for acknowledgment.

65. What is Error Control ?

Error control is both error detection and error correction. It allows the receiver to inform the sender of any frames lost or damaged in transmission and coordinates the retransmission of those frames by the sender. In the data link layer, the term error control refers primarily to methods of error detection and retransmission.

66. What Automatic Repeat Request (ARQ)?

Error control is both error detection and error correction. It allows the receiver to inform the sender of any frames lost or damaged in transmission and coordinates the retransmission of those frames by the sender. In the data link layer, the term error control refers primarily to methods of error detection and retransmission. Error control in the data link layer is often implemented simply: Any time an error is detected in an exchange, specified frames are retransmitted. This process is called automatic repeat request (ARQ).

67. What is Stop-and-Wait Protocol?

In Stop and wait protocol, sender sends one frame, waits until it receives confirmation from the receiver (okay to go ahead), and then sends the next frame.

68. What is Stop-and-Wait Automatic Repeat Request?

Error correction in Stop-and-Wait ARQ is done by keeping a copy of the sent frame and retransmitting of the frame when the timer expires.

69. What is usage of Sequence Number in Relaible Transmission?

The protocol specifies that frames need to be numbered. This is done by using sequence numbers. A field is added to the data frame to hold the sequence number of that frame. Since we want to minimize the frame size, the smallest range that provides unambiguous communication. The sequence numbers can wrap around.

70. What is Pipelining ?

In networking and in other areas, a task is often begun before the previous task has ended. This is known as pipelining.

71. What is Sliding Window?

The sliding window is an abstract concept that defines the range of sequence numbers that is the concern of the sender and receiver. In other words, he sender and receiver need to deal with only part of the possible sequence numbers.

72. What is Piggy Backing?

A technique called piggybacking is used to improve the efficiency of the bidirectional protocols. When a frame is carrying data from A to B, it can also carry control information about arrived (or lost) frames from B; when a frame is carrying data from B to A, it can also carry control information about the arrived (or lost) frames from A.

What are the two types of transmission technology available?

(i) Broadcast and (ii) point-to-point

74. What is subnet?

A generic term for section of a large networks usually separated by a bridge or router.

75. Difference between the communication and transmission.

Transmission is a physical movement of information and concern issues like bit polarity, synchronisation, clock etc.

Communication means the meaning full exchange of information between two communication media.

76. What are the possible ways of data exchange?

(i) Simplex (ii) Half-duplex (iii) Full-duplex.

77. What is SAP?

Series of interface points that allow other computers to communicate with the other layers of network protocol stack.

78. What do you meant by "triple X" in Networks?

The function of PAD (Packet Assembler Disassembler) is described in a document known as X.3. The standard protocol has been defined between the terminal and the PAD, called X.28; another standard protocol exists between hte PAD and the network, called X.29. Together, these three recommendations are often called "triple X".

79. What is frame relay, in which layer it comes?

Frame relay is a packet switching technology. It will operate in the data link layer.

80. What is terminal emulation, in which layer it comes?

Telnet is also called as terminal emulation. It belongs to application layer.

81. What is Beaconing?

The process that allows a network to self-repair networks problems. The stations on the network notify the other stations on the ring when they are not receiving the transmissions. Beaconing is used in Token ring and FDDI networks.

82. What is redirector?

Redirector is software that intercepts file or prints I/O requests and translates them into network requests. This comes under presentation layer.

83. What is NETBIOS and NETBEUI?

NETBIOS is a programming interface that allows I/O requests to be sent to and received from a remote computer and it hides the networking hardware from applications.

NETBEUI is NetBIOS extended user interface. A transport protocol designed by microsoft and IBM for the use on small subnets.

84. What is RAID?

A method for providing fault tolerance by using multiple hard disk drives.

85. What is passive topology?

When the computers on the network simply listen and receive the signal, they are referred to as passive because they don't amplify the signal in any way. Example for passive topology -linear bus.

86. What is Brouter?

Hybrid devices that combine the features of both bridges and routers.

87. What is cladding?

A layer of a glass surrounding the center fiber of glass inside a fiber-optic cable.

88. What is point-to-point protocol?

A communications protocol used to connect computers to remote networking services including Internet service providers.

89. How Gateway is different from Routers?

A gateway operates at the upper levels of the OSI model and translates information between two completely different network architectures or data formats.

90. What is attenuation?

The degeneration of a signal over distance on a network cable is called attenuation.

91. What is MAC address?

The address for a device as it is identified at the Media Access Control (MAC) layer in the network architecture. MAC address is usually stored in ROM on the network adapter card and is unique.

92. Difference between bit rate and baud rate.

Bit rate is the number of bits transmitted during one second whereas baud rate refers to the number of signal units per second that are required to represent those bits.
baud rate = (bit rate / N)
where N is no-of-bits represented by each signal shift.

93. What is Bandwidth?

Every line has an upper limit and a lower limit on the frequency of signals it can carry. This limited range is called the bandwidth.

94. What are the types of Transmission media?

Signals are usually transmitted over some transmission media that are broadly classified in to two categories.

a.) Guided Media: These are those that provide a conduit from one device to another that include twisted-pair, coaxial cable and fiber-optic cable. A signal traveling along any of these media is directed and is contained by the physical limits of the medium. Twisted-pair and coaxial cable use metallic that accept and transport signals in the form of electrical current. Optical fiber is a glass or plastic cable that accepts and transports signals in the form of light.

b.) Unguided Media: This is the wireless media that transport electromagnetic waves without using a physical conductor. Signals are broadcast either through air. This is done through radio communication, satellite communication and cellular telephony.

95. What is Project 802?

It is a project started by IEEE to set standards to enable intercommunication between equipment from a variety of manufacturers. It is a way for specifying functions of the physical layer, the data link layer and to some extent the network layer to allow for interconnectivity of major LAN protocols.

It consists of the following:

  1. 802.1 is an internetworking standard for compatibility of different LANs and MANs across protocols.
  2. 802.2 Logical link control (LLC) is the upper sublayer of the data link layer which is non-architecture-specific, that is remains the same for all IEEE-defined LANs.
  3. Media access control (MAC) is the lower sublayer of the data link layer that contains some distinct modules each carrying proprietary information specific to the LAN product being used. The modules are Ethernet LAN (802.3), Token ring LAN (802.4), Token bus LAN (802.5).
  4. 802.6 is distributed queue dual bus (DQDB) designed to be used in MANs.

96. What is Protocol Data Unit?

The data unit in the LLC level is called the protocol data unit (PDU). The PDU contains of four fields a destination service access point (DSAP), a source service access point (SSAP), a control field and an information field. DSAP, SSAP are addresses used by the LLC to identify the protocol stacks on the receiving and sending machines that are generating and using the data. The control field specifies whether the PDU frame is a information frame (I - frame) or a supervisory frame (S - frame) or a unnumbered frame (U - frame).

97. What are the different type of networking / internetworking devices?

  1. Repeater: Also called a regenerator, it is an electronic device that operates only at physical layer. It receives the signal in the network before it becomes weak, regenerates the original bit pattern and puts the refreshed copy back in to the link.
  2. Bridges: These operate both in the physical and data link layers of LANs of same type. They divide a larger network in to smaller segments. They contain logic that allow them to keep the traffic for each segment separate and thus are repeaters that relay a frame only the side of the segment containing the intended recipent and control congestion.
  3. Routers: They relay packets among multiple interconnected networks (i.e. LANs of different type). They operate in the physical, data link and network layers. They contain software that enable them to determine which of the several possible paths is the best for a particular transmission.
  4. Gateways: They relay packets among networks that have different protocols (e.g. between a LAN and a WAN). They accept a packet formatted for one protocol and convert it to a packet formatted for another protocol before forwarding it. They operate in all seven layers of the OSI model.

98. What is ICMP?

ICMP is Internet Control Message Protocol, a network layer protocol of the TCP/IP suite used by hosts and gateways to send notification of datagram problems back to the sender. It uses the echo test / reply to test whether a destination is reachable and responding. It also handles both control and error messages.

99. What are the data units at different layers of the TCP / IP protocol suite?

The data unit created at the application layer is called a message, at the transport layer the data unit created is called either a segment or an user datagram, at the network layer the data unit created is called the datagram, at the data link layer the datagram is encapsulated in to a frame and finally transmitted as signals along the transmission media.

100. What is difference between ARP and RARP?

The address resolution protocol (ARP) is used to associate the 32 bit IP address with the 48 bit physical address, used by a host or a router to find the physical address of another host on its network by sending a ARP query packet that includes the IP address of the receiver.

The reverse address resolution protocol (RARP) allows a host to discover its Internet address when it knows only its physical address.

101. What is the minimum and maximum length of the header in the TCP segment and IP datagram?

The header should have a minimum length of 20 bytes and can have a maximum length of 60 bytes.

102. What is the range of addresses in the classes of internet addresses?

Class A - 0.0.0.0 - 127.255.255.255
Class B - 128.0.0.0 - 191.255.255.255
Class C - 192.0.0.0 - 223.255.255.255
Class D - 224.0.0.0 - 239.255.255.255
Class E - 240.0.0.0 - 247.255.255.255

103. What is the difference between TFTP and FTP application layer protocols?

The Trivial File Transfer Protocol (TFTP) allows a local host to obtain files from a remote host but does not provide reliability or security. It uses the fundamental packet delivery services offered by UDP.

The File Transfer Protocol (FTP) is the standard mechanism provided by TCP / IP for copying a file from one host to another. It uses the services offer by TCP and so is reliable and secure. It establishes two connections (virtual circuits) between the hosts, one for data transfer and another for control information.

104. What are major types of networks and explain?

  1. Server-based network: provide centralized control of network resources and rely on server computers to provide security and network administration
  2. Peer-to-peer network: computers can act as both servers sharing resources and as clients using the resources.

105. What are the important topologies for networks?

  1. BUS topology: In this each computer is directly connected to primary network cable in a single line.
    Advantages: Inexpensive, easy to install, simple to understand, easy to extend.
  2. STAR topology: In this all computers are connected using a central hub.
    Advantages: Can be inexpensive, easy to install and reconfigure and easy to trouble shoot physical problems.
  3. RING topology: In this all computers are connected in loop. Advantages: All computers have equal access to network media, installation can be simple, and signal does not degrade as much as in other topologies because each computer regenerates it.

106. What is mesh network?

A network in which there are multiple network links between computers to provide multiple paths for data to travel.

107. What is difference between baseband and broadband transmission?

In a baseband transmission, the entire bandwidth of the cable is consumed by a single signal. In broadband transmission, signals are sent on multiple frequencies, allowing multiple signals to be sent simultaneously.

108. Explain 5-4-3 rule?

In a Ethernet network, between any two points on the network ,there can be no more than five network segments or four repeaters, and of those five segments only three of segments can be populated.

109. What MAU?

In token Ring , hub is called Multistation Access Unit(MAU).

110. What is the difference between routable and non- routable protocols?

Routable protocols can work with a router and can be used to build large networks. Non-Routable protocols are designed to work on small, local networks and cannot be used with a router.

111. Why should you care about the OSI Reference Model?

It provides a framework for discussing network operations and design.

112. What is logical link control?

One of two sublayers of the data link layer of OSI reference model, as defined by the IEEE 802 standard. This sublayer is responsible for maintaining the link between computers when they are sending data across the physical network connection.

113. What is virtual channel?

Virtual channel is normally a connection from one source to one destination, although multicast connections are also permitted. The other name for virtual channel is virtual circuit.

114. What is virtual path?

Along any transmission path from a given source to a given destination, a group of virtual circuits can be grouped together into what is called path.

115. What is packet filter?

Packet filter is a standard router equipped with some extra functionality. The extra functionality allows every incoming or outgoing packet to be inspected. Packets meeting some criterion are forwarded normally. Those that fail the test are dropped.

116. What is traffic shaping?

One of the main causes of congestion is that traffic is often busy. If hosts could be made to transmit at a uniform rate, congestion would be less common. Another open loop method to help manage congestion is forcing the packet to be transmitted at a more predictable rate. This is called traffic shaping.

117. What is multicast routing?

Sending a message to a group is called multicasting, and its routing algorithm is called multicast routing.

118. What is region?

When hierarchical routing is used, the routers are divided into what we will call regions, with each router knowing all the details about how to route packets to destinations within its own region, but knowing nothing about the internal structure of other regions.

119. What is silly window syndrome?

It is a problem that can ruin TCP performance. This problem occurs when data are passed to the sending TCP entity in large blocks, but an interactive application on the receiving side reads 1 byte at a time.

120. What are Digrams and Trigrams?

The most common two letter combinations are called as digrams. e.g. th, in, er, re and an. The most common three letter combinations are called as trigrams. e.g. the, ing, and, and ion.

121. Expand IDEA.

IDEA stands for International Data Encryption Algorithm.

122. What is wide-mouth frog?

Wide-mouth frog is the simplest known key distribution center (KDC) authentication protocol.

123. What is Mail Gateway?

It is a system that performs a protocol translation between different electronic mail delivery protocols.

124. What is IGP (Interior Gateway Protocol)?

It is any routing protocol used within an autonomous system.

125. What is EGP (Exterior Gateway Protocol)?

It is the protocol the routers in neighboring autonomous systems use to identify the set of networks that can be reached within or via each autonomous system.

126. What is autonomous system?

It is a collection of routers under the control of a single administrative authority and that uses a common Interior Gateway Protocol.

127. What is BGP (Border Gateway Protocol)?

It is a protocol used to advertise the set of networks that can be reached with in an autonomous system. BGP enables this information to be shared with the autonomous system. This is newer than EGP (Exterior Gateway Protocol).

128. What is Gateway-to-Gateway protocol?

It is a protocol formerly used to exchange routing information between Internet core routers.

129. What is NVT (Network Virtual Terminal)?

It is a set of rules defining a very simple virtual terminal interaction. The NVT is used in the start of a Telnet session.

130. What is a Multi-homed Host?

It is a host that has a multiple network interfaces and that requires multiple IP addresses is called as a Multi-homed Host.

131. What is Kerberos?

It is an authentication service developed at the Massachusetts Institute of Technology. Kerberos uses encryption to prevent intruders from discovering passwords and gaining unauthorized access to files.

132. What is OSPF?

It is an Internet routing protocol that scales well, can route traffic along multiple paths, and uses knowledge of an Internet's topology to make accurate routing decisions.

133. What is Proxy ARP?

It is using a router to answer ARP requests. This will be done when the originating host believes that a destination is local, when in fact is lies beyond router.

134. What is SLIP (Serial Line Interface Protocol)?

It is a very simple protocol used for transmission of IP datagrams across a serial line.

135. What is RIP (Routing Information Protocol)?

It is a simple protocol used to exchange information between the routers.

136. What is source route?

It is a sequence of IP addresses identifying the route a datagram must follow. A source route may optionally be included in an IP datagram header.

Refer this site 2 ur frndz